Sunday, November 25, 2018

Introduction to Cisco Catalyst 9200 Switch

Introduction to Cisco Catalyst 9200 Switch

Are you ready to upgrade Cisco Catalyst 2960 X / XR switch to Cisco 9200 Catalyst switch?
Today, November 13, 2018, Cisco announces a new 9200 Catalyst Switch in its Cisco Catalyst 9000 Portfolio, which already contains the Cisco Catalyst 9300, 9400 and 9500 switches. This Catalyst 9200 switch is an upgrade model for Cisco Catalyst 2960 X / XR switches. Cisco announces three different models in the Cisco Catalyst 9200 Switches.

The Cisco Catalyst 9200 Series Changer extends the performance of intentional networks and Cisco Catalyst 9000 hardware and software experience to a wider range of implementations. The Catalyst 9200 Series, with its family artocracy, offers the best catalyst properties of the next generation.

What do you get in the Cisco Catalyst 9200 Switch?
With a capacity of 160 Gbps per stack, you can get 4x1G SFP or 4X10G SFP + ports. Because it replaces the Cisco Catalyst 2960 X / XR switches, you can use the common operating system for switching, routing, wireless and IoT. The low-end access switches are manufactured using the IOS-XE operating system and standard programmable interfaces.


Figure 1.1 - Cisco Catalyst 9200 Switch



The Cisco Catalyst 9200 switches give you the same features as streaming telemetry. Yes, with Cisco Catalyst 2900, replaced by 9200, you can set an access switch in SD Access. XR switches with Cisco 9200 switches in my next article.

What are the different models of Cisco Catalyst 9200?

Cisco comes with the models below.
Catalyst 9200 24 and 48 port, fixed 1G uplink
Catalyst 9200 24- and 48-port fixed 10G uplinks
Catalyst 9200 Modular Uplinks with 24 and 48 ports


Catalyst 9200 24 and 48 port, fixed 1G uplink

For this type, Cisco launches two models with 1G uplink. These models are C9200L-24T / P-4G and C9200L-48T / P-4G. The features are below:
With the Cisco Catalyst 9200 switch, you have all the PoE + options available.
As mentioned earlier, you can get 4 x 1 G SFP uplink ports.
If you have a 48-port switch, you can get up to 48 ports with 30 W full PoE +
At low cost, you can now run SD Access, Cisco StackWise and MACsec
With the unnecessary power supplies and fans and IOS XE features.


Catalyst 9200 24- and 48-port fixed 10G uplinks

Cisco launches two 10G uplink models for this type. These models are C9200L-24T / P-4X and C9200L-48T / P-4X. The features are below:
With the Cisco Catalyst 9200 switch, you have all the PoE + options available.
As mentioned earlier, you can get uplink portals with 4 x 10 G SFP +.
If you have a 48-port switch, you can get up to 48 ports with 30 W full PoE +
At low cost, you can now run SD Access, Cisco StackWise and MACsec
With the unnecessary power supplies and fans and IOS XE features.


Catalyst 9200 24 and 48 port, modular uplinks

Cisco launches two 10G uplink models for this type. These models are C9200L-24T / P and C9200L-48T / P. The functions are below:
With the Cisco Catalyst 9200 switch, you have all the PoE + options available.
As mentioned earlier, you can get 4 x 1/10 G, 2 x 25/40 G modular uplinks
If you have a 48-port switch, you can get up to 48 ports with 30 W full PoE +
At low cost, you can now run SD Access, Cisco StackWise and MACsec
With the unnecessary power supplies and fans and IOS XE features.

0 Please Share a Your Opinion.: